Posts

Showing posts from July, 2017

HOW BYPASS FRP ON ANDROID & SPREADTRUM DEVICE WITHOUT PC OR FRP APK

Image
1. Make Sure A valid Sim card in the Phone with the Frp problem.
2. Call The device using Different Device.
3. Try to answer it by sliding it to message Icon.
4. And then click on the call icon at the top to show call dialer keyboard.
5. At this point, dial *#*#4636#*#* to enter Testing. 

6. Now click On Battery information or Usage Statistics and then click the back icon located at the left top corner to enter settings.
7. In settings, Go to developer option.
8. Put developer Option "On" and Put OEM Unlocking "On"
Note: If you can't find developer Option, click here to learn how to enable it
How To Enable Developer Option

9. Go back To Settings and click on account.
10. Click on the 3 dots vertical at the top and Untick Auto-Sync Data. Note : It will give you waring But Ignore it And proceed.
11. Off The device, Remove The Battery and reinsert it . If Battery is in-built, Just Off The Device and On it again Or Reboot.
12. Congratulations You Have Successfully bypass frp on…

HOW TO RESET SPREADTRUM DEVICE USING GSM ALADDIN

Image
In This Tutorial, I will be Showing You how to reset Your spreadtrum device after attempting Too Many Patterns Or Password. This Reset Your Device Without losing Any Files On Your Device. All You need Is Just Follow The Full Step By Step To Go About It.


REQUIREMENTS :
1. Spreadtrum Drivers
Download and learn How To Install Spreadtrum Drivers on pc
2.Gsm Aladdin
DOWNLOAD GSM ALADDIN
3. USB cable
4. PC


PROCEDURE :
1. Download Aladdin box from the above Link And Extract It To Your Desktop Of Your Pc.
2. After Extracting, Run Aladdin.exe as administrator. Wait For it To Load well.


3. After Aladdin has finished Loading, Click On The spreadtrum in the above. As shown in the image.


4. Now Tick On Phone unlock.

5. Now Choose Your Spreadtrum Device Chipset From The dropdown. 

NOTE : please You Must Know Your Spreadtrum Device Chipset before proceeding.

6. Now Click On Connect.

7. Click On start .

8. At This Point, Remove The Battery from The device And Reinsert It Back.
9. Now Hold The Volume Up while Connectin…

HOW TO REDUCE DATA USAGE ON ANDROID DEVICE

Image
1. Go to Settings As Shown in The Image below.

2. Scroll down To Account As Shown In The image Below.


3. Click On To Open And At The Top Of It, You will see Three Dots vertical. click On It And Untick Auto-Sync Data. If It prompt You Of Warning Ignore It And Click Ok as Shown in the Image Below.


Please If You face Any Problem, Just Drop Your Comments.

How To Avoid Frp bypass If You Factory Reset Your Device

Image
Hey Guys . Today Am I will be You How To Avoid Frp Bypass When You Factory Reset Your Device. Since Each Of Are Running On Android 5.0 and Above, You Have To Do This To Avoid You In locking up When Your do Factory Resting.
PROCEDURE :
YOU CAN WATCH THE VIDEO BELOW


PLEASE JOIN OUR FORUM FOR MORE DISCUSSIONS
ALBDROID FORUM
1. Since Your Device Is working Smoothly, Go to Settings. As Shown In The image Below.

2. Scroll down And Click Developer Options as shown in The image Below But if You Don't See Developer Option Go here to Learn how To Enable It


3. Now Put Developer Option On @ The Top And Put OEM Unlocking On and If It Gives You a Warning Please ignore It And Click Enable a shown In The Image Below.


4. After All Those Steps Done, Go back To Settings And Click On Account and Click the three dots @ the top to show Auto-Sync Date and Untick It as Shown in the image Below.
5. Now Reboot Your Device And Now You Safe From Frp bypass Protection.

Please Help To Share My Blog And Leave Your Commen…

HOW TO UPDATE YOUR DEVICE USING TCARD OR SP FLASH

Image
*TCARD METHOD 
1. Download Your Device TCard Stock Rom Below.
CLICK TO DOWNLOAD YOUR STOCK ROM


2. Copy the Tcard zip to both the phone storage and SD card And Boot the Device into recovery mode .
3. In stock recovery, you use Volume buttons to navigate and Power button to selectTap Apply update from SD cardNavigate to the Tcard update zip and select itIf prompted, tap Yes to confirm 
4. Reboot the phone.
*SP FLASH TOOL METHOD


Download Sp Flash Tool Flash Update Rom
CLICK TO DOWNLOAD YOUR STOCK ROM

Learn How To Update Using Sp Flash Tool
Tutorial On How To Update Your Device Using Sp Flash Tool
Stay Tuned For More Updates Or Subscribe To Get More Updates From This Site And Also Help To Share.

INFINIX NOTE 3 UPDATE ROMS

Image
Sp Flash Tool Update Roms And How To Update.
SP FLASH TOOL METHOD 
How To Update Using Sp Flash Tool
SP FLASH TOOL UPDATE ROMS
Version :X601-H536A1-N-170520V152
DOWNLOAD

Version :X601-H537C-N-170520V41
DOWNLOAD
TCard Update Roms And How To Update
TCARD METHOD 
How To Update Using TCARD Method
TCARD UPDATE STOCK ROMS

Version :T-card-X601-H536A1-N-170520V152
DOWNLOAD
Version :T-card-X601-H537C-N-170520V41
DOWNLOAD
Credits To INFINIX mobility For The Roms
Feel Free To Leave Your Comment If You Encounter Any Problem.

stay Tuned For More Updates From This Site And Also Help To Share.


How to update the Infinix Hot 4 (X557) usingSp Flash Tool

Image
Infinix Hot 4 x557 Specs
5.5-inch Touch Display, 720 x 1280 pixels (267ppi)
1.3GHz quad-core MediaTek MT6580 CPU with 2GB RAM
Android 6.0 (Marshmallow)

16GB Storage with support for memory card up to 32GB
8MP Rear Camera and 5MP Front Camera 3G and Wi-Fi
Fingerprint Sensor (Rear)
4000 mAh Battery with Fast Charging

Sp Flash Tool Method
Learn How To Update It Here
Download Infinix Hot 4 (X557) Stock Rom 
DOWNLOAD


You Can Also Learn How To Update Using TCard 
TCard Update Method
Please Leave Your Comment After Successfully Flash or If You Encounter Any Problem.
Please Help To Share My Blog.
Thank You.

How To Easily Download From Mega App Using Pc

Image
REQUIREMENTS:

Internet Download Manager(IDM)
DOWNLOAD

Mega Downloader
DOWNLOAD

Follow The Steps To Easily Download From Mega App 
1. Right-Click on the mega.nz download link address and copy the link. 


2. Open Mega Downloader which you've downloaded and installed then click on Streaming on the Menu Bar. 


3. Click on Watch Online 


4. Paste the link you've copied in the previous step, and wait for 3-4sec. It'll automatically generate the "Streaming URL Link.



5. Copy the "Streaming URL Link" generated.


6. Now, open your IDM (Internet Download Manager) and click "Add URL"


7. Paste the URL link you've copied on the "Address Bar". 



8. Click OK

How to Install TWRP and root Tecno Camon CX

Image
Two main steps you need to root your Tecno Camon CX:
1. How Unlocking the Bootloader of the Tecno Camon CX.

See Tutorial To Unlock Bootloader For Tecno Cx

2. Flashing TWRP ported by Team Hovatek and SuperSU.zip
[Install TWRP and root Tecno Camon CX]
1. Download SuperSU.zip from the link below Place the downloaded SuperSU.zip to the root of your SD card
Play Store Download Links SuperSU Apk

SuperSU Pro Apk
Straight Downloads 
SuperSU V2.79   DOWNLOAD
SuperSU V2.78   DOWNLOAD

2. Download TWRP for Tecno Camon CX recovery.
DOWNLOAD
3. Now, Setup ADB and Fastboot on the PC using the guide here
4. Extract and copy the TWRP recovery.img into the same folder as the fastboot.exe and adb.exe

5. Connect the phone to the PC via USB cord while switched On and boot it into Fastboot (as instructed in the Bootloader unlock guide; don't forget to re-enable OEM unlocking and USB Debugging)


6. When the phone boots into Fastboot mode, load the TWRP recovery to the phone using the following command

fastboot boot recovery…

How To Unlooking Bootloader For Tecno Cx

Image
1. Enable USB Debugging on the the Tecno Camon CX. 
See Tutorial Here
2. Enable OEM Unlocking under Settings > Developer options.


3. Install ADB and Fastboot on your PC.
See Tutorial Here
4. Connect your Tecno Camon CX to the PC via USB cord (the phone should be on)and Launch ADB.
5. In ADB, you will execute the command below (press Enter after the command)
adb devices


6. Tecno Camon CX should be detected by ADB. If ADB detects other devices but not the Tecno Camon CX then it must be an ADB clash, 
See How To Fix Adb Clash Here
7. Once the Tecno Camon CX gets detected, boot it into Fastboot by running the command below.  (press Enter after the command)
adb reboot-bootloader
8. The phone should now enter Fastboot, you will see a black screen with only fastboot written at the top or bottom. In Fastboot, execute the command below.
(press Enter after the command)
fastboot oem unlock
9. You should see a prompt on the Tecno Camon CX asking you to confirm Bootloader unlock, press the volume up button for …

HOW TO INSTALL SPREADTRUM DRIVERS ON PC

Image
This step will help you to install your spreadtrum drivers on you computer. Just follow the steps below.

REQUIREMENT 
HOW TO INSTALL SPREADTRUM DRIVERS ON PC
1. Download SciU2S Android USB Spreadtrum Drivers.
DOWNLOAD
2. Download SCI android usb driver jungo v4
DOWNLOAD
3. Disable driver signature verification enforcement if using a Windows 7, 8, 8.1 or 10 PC.
Learn How To Disable It Here
4. Setup ADB 
Setup It Here
5. Spreadtrum phone
PROCEDURE OR STEPS TO FOLLOW
1. Unzip SCI android usb driver jungo v4 to get its content
1b. Open the SCI-android-usb-driver-jungo-v4 folder > x64 (if you're using a 64 bit PC) or x86 (if you're using a 32 bit PC) 
1c. Launch DPInst.exe and follow the driver installation Wizard.
1d. Unzip the SciU2S Android USB Spreadtrum Drivers zip file to get its content.


2. In Windows, go to Control Panel and open Device Manager.


3. Click any of the device groups (any of the items on the list) you see there, then from Action menu at the top, select Add legacy hardware 


4. …

HOW TO USE USB DEVIEW

Image
PROCEDURE OR STEPS TO FOLLOW 
1. Download USB Deview
For 32 bit  : DOWNLOAD
For 64 bit : DOWNLOAD
2. Run USB Deview as Administrator


3. Scroll to the driver you wish to uninstall


4. Right-click the driver and select Uninstall Selected Devices


5. Click Yes to confirm

Stay Tuned For More Updates Or Subscribe To Get More Updates From This Site And Also Help To Share.
Leave Your Comment.
Thank You.

HOW TO FACTORY RESET ITEL OR SPREADTRUM DIVICE EASILY

Image
REQUIREMENTS TO HARD RESET ITEL ON PATTERN LOCK OR PIN. 
HOW TO INSTALL SPREADTRUM DRIVERS
Learn How To Install Drivers Here
*HOW TO DOWNLOAD FROM MEGA APP EASILY. 
How To Easily Download From Mega App

1. Download Moborobo( HERE )Pc App and install it on your PC.
2. Download Simple Hardreset ( HERE ) And save it in your PC as well.
3. Power off the Itel Or Any Spreadtrum android phone or remove and reinsert the battery. Press volume up and power button together.
4. Release the buttons when the screen lights up with a kind of blank screen.
5. Wait for the Test mode screen to come up. The Test mode screen has some options like Full test, Item test, Factory Reset etc.
6. Now try to drag down the notification bar from the top of the screen. When you bring it down, click on the Settings icon which will take you to the phone’s settings menu.
7. In the Settings menu, move down to About phone and tap on build number five times to enable developer options.
8. Go back to developer options and enable Usb deb…

Shatta Wale – Forgetti Ft. ( Mililtants X Pope Skinny X Natty Lee) ( Prod By Willis Beatz) Video

Image
Shatta Movement Empire CEO Shatta Wale brings to us again another Super new banger which he featured his Millitants Joint 77, Addi Self, Captan, Pope Skinny and Natty Lee on this one which was produced by the Taking Over beat maker Willis Beatz. Download it below And Feel The Excitement.
DOWNLOAD MP4 BELOW
DOWNLOAD


Stay Tuned For More Updates Or Subscribe To Get More Updates From This Site And Also Help To Share.


Thank You.