TECNO W3 KEY SPECS & FEATURES 5-inch Touch Display, 480 x 854 pixels (196ppi) 1.3GHz quad-core CPU with 1GB RAM Android 6.0 (Marshm...
TECNO W3 KEY SPECS & FEATURES
5-inch Touch Display, 480 x 854 pixels (196ppi)
1.3GHz quad-core CPU with 1GB RAM
Android 6.0 (Marshmallow) with HiOS
8GB Storage with support for memory card
5MP Rear Camera and 2MP Front Camera
4G LTE (only on Tecno W3 LTE)
2500 mAh Removable Battery
ITEMS NEEDED:>
1. Install VCOM drivers on your PC
2. Download SuperSU 2.66.zip
3. Copy SuperSU.zip to both the phone’s SD card and internal storage
Download TWRP for Tecno W3
TWRP for Tecno W3-H806A1-M-161230V103
TWRP for Tecno W3-H806A1-M-170204V109
TWRP for Tecno W3-H806A1-M-170222V112
(Credits To Hovatek For The TWRP)
Steps To Flash
1. Switch off the phone [Still With Battery Inside] And
Flash the TWRP recovery.img to the phone using SP Flash tool(follow The Link To Flash)
2. Boot the phone into recovery mode using Volume up button + Power button
3. In TWRP, if you get a prompt asking you to swipe to allow TWRP modify the system partition then go ahead and swipe. To swipe, place your finger on the green circle then slide it to the right
4. In TWRP recovery, tap Install
Navigate to the location of the SuperSU.zip and select it
Swipe to confirm flashing of SuperSU.zip and wait till flashing is complete
Reboot the phone normally
5. Download Root Checker To Check Whether Device is Successfully Rooted
Please If You Encounter Any Problem, Don't Hesitate To Leave Your Comment Below.
Stay Tuned For More Updates Or Subscribe To Get More Updates From This Site And Also Help To Share.
Thank You.
COMMENTS