THIS GUIDE IS FOR FLASHING FIRMWARE TO MEDIATEK (MTK) ANDROID PHONES.
NOTE:
>> If you get the inactive start button error when using Miracle
Requirements
1. Download Miracle Box v2.27a + Loader
2. PC
3. USB cord
4. Manually install Mediatek VCOM drivers
5. Download the firmware for the phone model you are trying to flash
or
6. Backup a working phone of the same model using
PROCEDURE TO FLASH
1. Extract the Miracle Box zip into a folder and launch Miracle loader exe
2. Wait till Miracle Box opens to the Dashboard
3. Click the MTK Tab
4. Tick Write
5. Select the phone's chipset from the dropdown menu
6. Click the folder icon
7. In the window that pops up, select the firmware for the phone model (in .bin format) and click Open
8. Click the Start button
9. Switch off the phone (with a charged battery inside) then connect it to the PC via USB cord. Miracle Box should detect the phone
10. Miracle box should begin flashing the firmware, wait till it gets to 100%
11. Once it gets to 100%, close Miracle box and disconnect the phone
>>>HOW TO BACKUP USING MIRACLE BOX <<<
Please If you Get Any Difficulties, Just Leave Your Comment Below
Help to Share My Blog
Thank You
0 Comments