How To Unlooking Bootloader For Tecno Cx


1. Enable USB Debugging on the the Tecno Camon CX. 


2. Enable OEM Unlocking under Settings > Developer options.



3. Install ADB and Fastboot on your PC.


4. Connect your Tecno Camon CX to the PC via USB cord (the phone should be on)and Launch ADB.

5. In ADB, you will execute the command below (press Enter after the command)

adb devices



6. Tecno Camon CX should be detected by ADB. If ADB detects other devices but not the Tecno Camon CX then it must be an ADB clash, 


7. Once the Tecno Camon CX gets detected, boot it into Fastboot by running the command below. 
(press Enter after the command)

adb reboot-bootloader

8. The phone should now enter Fastboot, you will see a black screen with only fastboot written at the top or bottom.
In Fastboot, execute the command below.

(press Enter after the command)

fastboot oem unlock

9. You should see a prompt on the Tecno Camon CX asking you to confirm Bootloader unlock, press the volume up button for Yes.

10. You should now see a success message.
Reboot your phone by executing the command below.
(press Enter after you've typed the command)

fastboot reboot

Leave Your Comment It Works Or You Face Any Difficulties.

Thank You.

Comments