Hello, Today Am going to show You how to unbreak any MTK device (Example like Infinix, Tecno Gionee etc . All You need is to follow the instructions below Carefully.
1.Download an install MTK drivers from here.
2.Download SP flash tool
3.Download the stock rom of the device you want to flash.
4. Extract SP Flash Tool and launch.
5.Now click scatter-loading button so that flash process can begin.
6.locate the scatter file of the device. It will be inside the folder of the rom you downloaded.
Facing Brom Errors Issues In Sp Flash Tool, Just Follow The Tips Here To Fix them.
Fix Brom Errors >>
7.Untick Preloader (not really necessary but a great precaution) tick this if the device is completely DEAD.
NOTE; Please make sure you untick DSP_BL if found on the list shown in SP Flash Tools especially when trying to flash devices with older chips like mt6572, mt6577 etc
Now click download button.
8.Power off the device and remove battery (if battery is in-built don't worry just continue ).
Most new devices now require battery for flashing.
Connect the device to the computer with USB and wait for SP Flash Tool to detect it.
By Holding volume down or volume up button and connect the device for easy detection.
Once phone is detected a red line will be seen at the bottom followed by a yellow line.
When flashing is completed, a green tick is shown on the screen. Older versions of so flash tool will show a green circle.
Insert battery into the phone and reboot device
9.If your device boot loops after flashing, do a factory reset.
10.Enter into recovery by holding volume down and power button.
11.Scroll down the chinese menu and tap emmc to do a factory reset
12.If you don't like chinese, enter into recovery by holding volume up and power button.
13.When you see the android logo press volume up an power button again to see menu list.
14.Select factory reset and Reboot device
For Any Problem, please Leave You comments below...