SEARCH

How to Root INFINIX not 3 or 3 Pro





A PC with Mediatek Vcom Drivers properly intalled

Vcom Drivers

SP Flash Tool

Sp Flash exe

A working USB cable
Infinix X601

Now to the procedure

1. Download the Recovery zip from the link provided below in your PC (not mobile)
INFINIX note 3

INFINIX note 3 Recovery Image

INFINIX not 3 pro

INFINIX note 3 pro Image

2. Extract the zip into a new folder
Both the scatter and the recovery image should be in the same folder

3. Start SP Flash Tool and load the scatter from the folder where you extracted the zip

4. After loading the scatter, click on Download option on the flash tool without making any other changes
At this stage, make sure your Note 3 is already switched off

5. Connect the switched off phone to the PC with the usb cable for the flashing process to start
If you met the prerequisites, you should see a red progress bar, followed by a yellow one and finally a tick appears to show that the recovery has been flashed successfully

6. Unplug the cable from the phone

7. Now Press Volume Up + Power key to boot into recovery to confirm that the recovery has been flashed successfully

Congrats, You now have a working custom recovery for your Infinix X601

HOW TO ROOT INFINIX NOTE 3 - X601

1. Download the supersu zip on your PC ( not mobile)and place it in the root of your external sdcard.

SuperUser.zip

2. Reboot your Device into CTR recovery

3. Go to >> Install Zip >> Choose zip from Sdcard >> and confirm to flash it

4. Reboot after the flashing process is complete

DO NOT interfere with the device in any way when it is rebooting even if you find like it's bootlooping - This is because the boot image is patched for rooting to be successful

The device will then boot normally and you will find SuperSU in your apps

You can download your favourite root checker app to confirm.

No comments:

Post a Comment